4G-LTE-ANTM-O-3 antenna is an integrated 3-in-1- indoor and outdoor antenna. It comes with two Long Term Evolution (LTE) antennas and one Global Positioning System (GPS) antenna in a single radome. Figure 1 shows the 4G-LTE-ANTM-O-3 antenna.
The 4G-LTE-ANTM-O-3 antenna supports the following features:
1. No tune, multiband coverage, dual 4G LTE, and GPS L1 frequencies.
2. Metal 5/8-inch stud mount with serrated face nut provides single cable exit for easier installation or antenna replacement.
3. Attractive low-profile housing for added overhead clearance.
4. IP67-compliant design provides maximum protection against water or dust under severe environmental conditions.
5. High-performance, low-loss cable, and high-quality connectors for maximum Radio Frequency (RF) system efficiency.
6. UV-resistant red, blue, black, or white radome.
|Operating Frequencies||698-960 MHz1710-2700 MHz|
|Nominal Impedance||50 Ohms|
|Gain 1(Typical)||2.5 dBi|
|Maximum Power||3 Watts|
|VSWR 2||< 2.5:1|
|Elevation Plane (3 dB Beamwidth)||30° (nominal)|
|Azimuth Plane (3 dB Beamwidth)||Omni-directional|
|Cable||4 ft RG174 VW-1 compliant|
|Base Diameter||137 mm|
|Color||White, Black, Red or Blue|
|Environment||Indoor and outdoor|
|Mounting||5/8 inch lug with serrated face nut, optional adhesive backing (peel-off), 17 sq. inches area (minimum) on a flat smooth surface, 5/8 inch diameter hole through mounting surface|
|Operating and storage temperature||-40 to +85 degree C|